Premium Hot Stone Heater for Massage Therapy - 6 Quart Fast Heating Volcanic Stone Warmer for Home Spa & Professional Salon Use - Relaxing Aromatherapy & Deep Tissue Massage Essential

Specification: Item Type: Stone Heater Material: Enamel + Aluminum Lid + Stainless Steel Color: As Picture Shows Capacity: 6 Quart Voltage: 110V Plug Type: US Plug Package Size: 51 * 37 * 24cm / 20 * 14.6 * 9.4inch Package Weight: Approx. 4313g Package List: 1 * Enamel Inner Pot 1 * Stainless Steel Exterior 1 * Spoon 1 * Lid 1 * English Manual Direction for Use: 1. Put the hot stone in heater and add water until the hot stone is completely submerged. (Adding hot water directly can shorten the heating time) 2. Plug in the power switch, when heating, adjust the temperature control knob to the preheating position firstly, it can quickly heat the water to 65 degrees(the whole process of preheating takes about 15 minutes, warm water can shorten the time). 3. Immediately after the water temperature reaches 60 degrees, turn the knob to the temperature control range. Pay attention to the water temperature until it is stable at 55 degrees. Heating at this temperature is continued for ten minutes to ensure that the heat is sufficiently absorbed by hot stone. 4. To avoid burns: the temperature of hot stone should not exceed 60 degrees, the average person's skin can only withstand 55 degrees) Note: 1. When adding water to the heating pot, the water level should not be too high, not too close to the edge of pot, prevent the water from overflowing when the hot stone is released. 2. The lid should be lightly handled to prevent cracking and breaking. 3. After the heating pot power indicator light is automatically turned off, the hot stone that needs to be used can be taken out from the pot, wipe the water off the stone with a towel and placed it on towel until it is cooled to be suitable for the massage.